Just posting to see if anyone else has experienced this same problem. I get from a verified source here with good quality products but I tend to get a knot in the glutes for about 1-2 days after injection. I use a 23 G to pin and even heat up the oil and massage the muscle before and after injection. I've heard Test C causes less pip for others? Any input would be helpful if this is normal or not. Or if the needle should be changed or switching oils.
Steroid Source Talk
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
TEST E PIP?
- Thread starter Adionne10
- Start date
23G is kinda big to pin with that might be causing it. I use 23 to draw and 27 to pin. (1 ml test e per pin as well)
Also if you are getting a knot that might mean you arent going deep enough into the muscle. I use 0.5 inch but mainly pin delts. I did glutes a couple times and got a knot maybe once or twice. might want 1 inch for glutes
Also if you are getting a knot that might mean you arent going deep enough into the muscle. I use 0.5 inch but mainly pin delts. I did glutes a couple times and got a knot maybe once or twice. might want 1 inch for glutes
Nandrolorian
Active member
There was a run of test e raws causing gnarly pip for a while. Use test cyp instead, no reason not to. I wouldn't consider e again until there were no reports of pip like that for a few months
The_Mandalorian
Member
DAMN! I just came here to ask the same damn question. I've never had PIP before but now in the last 3 months its been getting horrible.
Tried 3 different verified sources, Test E or Test P, Grape Seed Oil or Synthetic it doesn't fucking matter. It also happens whether I inject into glutes or shoulder.
Anyone got any advice? Tips?
Test e can cause pip because of how it breaks down, caused massive lumps for me like grapefruit sized. Test c still gives me lumps but they're tiny in comparison
Test E raws have a considerably lower melting point than Test C. The result is that the powder almost always melts a bit during shipping and then re-solidifies. When this happens, the test E can give significant PIP when injected. I also believe test E raws all had some contaminating acid for a long time that may also contribute to the issue.
Gullinbursti
Active member
It never used to which is weird but such is life when you're injecting Chinese bathtub chemicals like we are. I'll stick to prop and cyp
Last edited:
jumdumpster
Active member
Ive had multiple sources sell test e thats perfect and test e that gives me hell. i had an order not too long ago start giving me insane pip, so bad i switched to cyp. with test e it would literally just depend on the order.
Easy solution to your enthanate issues is to mix a 1:1 ratio with a sterile oil like gso, cso, mct.
Draw a .5ml of your compound, draw .5ml of sterile oil and repeat as needed to reach dosage.
I get ridiculous pip from enthanate regardless of source and this smoothes it out like nothing.
Draw a .5ml of your compound, draw .5ml of sterile oil and repeat as needed to reach dosage.
I get ridiculous pip from enthanate regardless of source and this smoothes it out like nothing.
Doctorstabs
New member
Maybe try giving your glutes a break for a while. Try pinning lats or ventro glutes.