- Joined
- Mar 21, 2018
- Messages
- 592
- Reaction score
- 49
If you did then yeah.
Last edited:
I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.Are your semi finished injectables filtered already? Can I just draw and inject from it ?
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?primalblueprint" pid='48018' dateline='1554730132:
I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.Are your semi finished injectables filtered already? Can I just draw and inject from it ?
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!Its not filtered, which what makes it semi finished.
@“dontmakethisawkward” soon™
MattMatt93" pid='48020' dateline='1554730805:
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?primalblueprint" pid='48018' dateline='1554730132:
I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.Are your semi finished injectables filtered already? Can I just draw and inject from it ?
DragonOrdnance" pid='48023' dateline='1554731285:
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!Its not filtered, which what makes it semi finished.
@“dontmakethisawkward” soon™
primalblueprint" pid='48024' dateline='1554731367:
MattMatt93" pid='48020' dateline='1554730805:
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?primalblueprint" pid='48018' dateline='1554730132:
I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.Are your semi finished injectables filtered already? Can I just draw and inject from it ?
DragonOrdnance" pid='48023' dateline='1554731285:
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!Its not filtered, which what makes it semi finished.
@“dontmakethisawkward” soon™
https://www.medical-and-lab-supplie...WTp1dR7MlPvYIYM0NIwI2JpGPHMVsH0gaAnsWEALw_wcB
It is a slight pain in the ass to push all the oil through it but it is worth it to me for the amount of $ you save IMO.
MattMatt93" pid='48026' dateline='1554733270:
primalblueprint" pid='48024' dateline='1554731367:
MattMatt93" pid='48020' dateline='1554730805:
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?primalblueprint" pid='48018' dateline='1554730132:
I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.Are your semi finished injectables filtered already? Can I just draw and inject from it ?
DragonOrdnance" pid='48023' dateline='1554731285:
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!Its not filtered, which what makes it semi finished.
@“dontmakethisawkward” soon™
https://www.medical-and-lab-supplie...WTp1dR7MlPvYIYM0NIwI2JpGPHMVsH0gaAnsWEALw_wcB
It is a slight pain in the ass to push all the oil through it but it is worth it to me for the amount of $ you save IMO.
Totally! Thank you for the link do I need to filter it each injection and if I have too do I need a new filter each time?
primalblueprint" pid='48041' dateline='1554738779:
MattMatt93" pid='48026' dateline='1554733270:
primalblueprint" pid='48024' dateline='1554731367:
MattMatt93" pid='48020' dateline='1554730805:
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?I asked him this last week. He would advise against pinning from the 100ml vial and that you should personally re filter them into smaller vials with a syringe filter. You can pin from the 100ml vial if you choose to do so, PIP might come into play.
DragonOrdnance" pid='48023' dateline='1554731285:
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!Its not filtered, which what makes it semi finished.
@“dontmakethisawkward” soon™
https://www.medical-and-lab-supplie...WTp1dR7MlPvYIYM0NIwI2JpGPHMVsH0gaAnsWEALw_wcB
It is a slight pain in the ass to push all the oil through it but it is worth it to me for the amount of $ you save IMO.
Totally! Thank you for the link do I need to filter it each injection and if I have too do I need a new filter each time?
Oh let me explain, so that syringe filter is made to attach to a 10cc syringe, So you would buy a pack of 10ml vials which is also cheap (you can find it on the same website on the link i sent you) 1) Draw 10ml with your 10cc syringe from the 100ml vial
2) attach Syringe filter,then transfer your oil to your new 10ml sterile vial.
After that you just pin like you normally would because the gear is now fully filtered… That syringe filter will be good to transfer all 100ml into 10 separate 10ml vials. It will probably take 10 min per vial to push all the oil through the filter so dedicate about 90 minutes to do the full transfer process.
MattMatt93" pid='48046' dateline='1554740160:
primalblueprint" pid='48041' dateline='1554738779:
MattMatt93" pid='48026' dateline='1554733270:
primalblueprint" pid='48024' dateline='1554731367:
No problem totally get it let me ask you do you know where I can get a syringe filter? Is this an easy process too?
I understand thank you so I would just need to filter it before injecting? I don’t need to add anything to it!
https://www.medical-and-lab-supplie...WTp1dR7MlPvYIYM0NIwI2JpGPHMVsH0gaAnsWEALw_wcB
It is a slight pain in the ass to push all the oil through it but it is worth it to me for the amount of $ you save IMO.
Totally! Thank you for the link do I need to filter it each injection and if I have too do I need a new filter each time?
Oh let me explain, so that syringe filter is made to attach to a 10cc syringe, So you would buy a pack of 10ml vials which is also cheap (you can find it on the same website on the link i sent you) 1) Draw 10ml with your 10cc syringe from the 100ml vial
2) attach Syringe filter,then transfer your oil to your new 10ml sterile vial.
After that you just pin like you normally would because the gear is now fully filtered… That syringe filter will be good to transfer all 100ml into 10 separate 10ml vials. It will probably take 10 min per vial to push all the oil through the filter so dedicate about 90 minutes to do the full transfer process.
Thank you! This is great information I just watched some YouTube tutorials too and for sure can do this no problem but one more thing are the vials already clamped with the rubber thing for pinning or do I have to push one into the vials?
Thank you !primalblueprint" pid='48047' dateline='1554740532:
https://www.medical-and-lab-supplies.com/10-ml-clear-sealed-sterile-glass-vial-silver.htmlMattMatt93" pid='48046' dateline='1554740160:
Thank you! This is great information I just watched some YouTube tutorials too and for sure can do this no problem but one more thing are the vials already clamped with the rubber thing for pinning or do I have to push one into the vials?primalblueprint" pid='48041' dateline='1554738779:
Oh let me explain, so that syringe filter is made to attach to a 10cc syringe, So you would buy a pack of 10ml vials which is also cheap (you can find it on the same website on the link i sent you) 1) Draw 10ml with your 10cc syringe from the 100ml vialMattMatt93" pid='48026' dateline='1554733270:
Totally! Thank you for the link do I need to filter it each injection and if I have too do I need a new filter each time?https://www.medical-and-lab-supplie...WTp1dR7MlPvYIYM0NIwI2JpGPHMVsH0gaAnsWEALw_wcB
It is a slight pain in the ass to push all the oil through it but it is worth it to me for the amount of $ you save IMO.
2) attach Syringe filter,then transfer your oil to your new 10ml sterile vial.
After that you just pin like you normally would because the gear is now fully filtered… That syringe filter will be good to transfer all 100ml into 10 separate 10ml vials. It will probably take 10 min per vial to push all the oil through the filter so dedicate about 90 minutes to do the full transfer process.
already sealed.
Got everything today, love the packaging! Test was crashed, but no biggie. Good turnaround time, thanks again!If you did then yeah.
Thanks for the reply. I just wanted to know when to time taking it with my fast.Protein powdah
Haha yeah man soon the restocks should be herefuck I missed the domestic tren eh