I don’t get why taking 2 seconds to aspirate is a big deal for some people.
Just do it anyway. If you somehow manage to bullseye a vein you will get a flash with minimal effort pulling wise on the plunger.
Don’t know how one could be better off without it when it takes next to nothing effort wise to do.
That being said it’s been over 3 years for me and not Once have I managed to square up a vein
Directly . I have however gone through some capillaries resulting in blood coming into the barrel
About the same size as the air bubbles you see . Which when using compounds like tren is nice. That way I know I at least have a chance at avoiding tren cough if I try again in a diff area.
Just my .02
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
For example:dexes" pid='68111' dateline='1568171731:
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.
I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
When you load the gear pull o.1cc air. When the pin is in at 90 degree angle tilt the syringe a tiny bit upward and the bubble goes to the back of the syringe. Then slowly inject and at the end of the injection the last bit of gear goes in. Ive read it can reduce pip. Anecdotally with DHB or no esters I agree.dexes" pid='68111' dateline='1568171731:
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.
I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
I’ll have to try it. I’m more thinking about not losing out any gear more than pip personally.thallandchill" pid='68136' dateline='1568208551:
When you load the gear pull o.1cc air. When the pin is in at 90 degree angle tilt the syringe a tiny bit upward and the bubble goes to the back of the syringe. Then slowly inject and at the end of the injection the last bit of gear goes in. Ive read it can reduce pip. Anecdotally with DHB or no esters I agree.dexes" pid='68111' dateline='1568171731:
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.
I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
Rich Piana said he never used an alcohol swab in 25 years hahaI mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
Hey, I haven’t used any in years either! But I don’t aspirate. I like to live dangerously.I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
Not sure if I’d blow up the gym toilet and pin the glute though…Masterofron" pid='68154' dateline='1568223543:
Hey, I haven’t used any in years either! But I don’t aspirate. I like to live dangerously.I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…