Homebrew Syringe Filter Problems

[Primobro]

Ok guys so I just got done filtering about 300ml of gear… 100ml of Test cyp, 100ml of test pp, and 100ml mast prop… I used 20 syringe filters for all of this and just now realized that 10 of those filters were PES filters (.22 and sterile) but I have read that they’re not meant to withstand BA or BB or both… I used about a filter every 20ml and had zero issues with the finished product. If I have a perfectly clear solution does this mean my filters stayed in tact… I’m sure if they melted I would have seen the oil become slightly clouded or show some signs… If anyone here has some good experience please let me know

 

[Dexter]

https://www.reddit.com/r/steroids/wiki/homebrew/list#wiki_filtering

Scroll down to “filter types”.

gives a good rundown of various filters and it recommends PES or PVDF.

Where did you get your raws. And congrats on the large stock before you, happy injecting.

 

[Primobro]

Dexter" pid='68569' dateline='1568527276:

https://www.reddit.com/r/steroids/wiki/homebrew/list#wiki_filtering

Scroll down to “filter types”.

gives a good rundown of various filters and it recommends PES or PVDF.

Where did you get your raws. And congrats on the large stock before you, happy injecting.

Awesome man thank you! I used Reddit’s procedures for the whole thing but must have missed that. I got my test cyp from Misriah and the mast prop/test pp I got from a new source on Meso. I may or may not send off my brews to get tested… all depends on how I feel after a few weeks and if cash flow permits. I know there’s a guy on Meso who does a blind mass spec (I think that’s what they call it) for like $150 and I don’t know if that’s per compound or not…

 

[Dexter]

Primobro" pid='68594' dateline='1568560744:

Dexter" pid='68569' dateline='1568527276:

https://www.reddit.com/r/steroids/wiki/homebrew/list#wiki_filtering

Scroll down to “filter types”.

gives a good rundown of various filters and it recommends PES or PVDF.

Where did you get your raws. And congrats on the large stock before you, happy injecting.

Awesome man thank you! I used Reddit’s procedures for the whole thing but must have missed that. I got my test cyp from Misriah and the mast prop/test pp I got from a new source on Meso. I may or may not send off my brews to get tested… all depends on how I feel after a few weeks and if cash flow permits. I know there’s a guy on Meso who does a blind mass spec (I think that’s what they call it) for like $150 and I don’t know if that’s per compound or not…

Measure and Weights(M&W)…I think that’s the Meso guy doing the blind id for raws.