What's new
Steroid Source Talk

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

First time HGH

TGIFRIDAYS123

New member
First timer with HGH here. I was reconstituting the powder with a 3 mL syringe with a 27 g needle and as soon as I inserted the syringe with BAC water it all shot out in half a second from the pressure before I could even push the plunger. From what i’ve read you’re supposed to put the water in slowly? Will this affect my GH or am i just overthinking?
Thank you!
 

Hypertrophy

Well-known member
Verified Source
First timer with HGH here. I was reconstituting the powder with a 3 mL syringe with a 27 g needle and as soon as I inserted the syringe with BAC water it all shot out in half a second from the pressure before I could even push the plunger. From what i’ve read you’re supposed to put the water in slowly? Will this affect my GH or am i just overthinking?
Thank you!
The solution is fine. I would just avoid any shaking of the vial. Also, if you're using 1ml of BAC water for reconstitution, then 1 click on the slin pin will be 1iu.
 

Nandrolorian

Active member
To avoid this in the future you can pin some air into the vial, so when you go to add your bac water, the vacuum won't pull it in like it did for you.

Yeah hyper poses a good question, if that's a generic, sounds like it is, then it's likely a kit of 10iu vials and no..2iu = 2 units not 20 units. (iu=international units).

I feel like, for at least harm reduction, we should verify a few things before you jam that baby into your abdomen.

1) is this a kit of generics and let's work to identify how many units each vial is meant to have.

2) how many iu (units) are you attempting to run a day? And what's your protocol.

3) I see you're using a 3ml syringe to reconstitute, but what are you intending to use to pin, it sounds like the 3ml syringe again. Do you have insulin needles? They can be bought over the counter no pressure no prescription at any pharmacy if you're stateside.
 

TGIFRIDAYS123

New member
To avoid this in the future you can pin some air into the vial, so when you go to add your bac water, the vacuum won't pull it in like it did for you.

Yeah hyper poses a good question, if that's a generic, sounds like it is, then it's likely a kit of 10iu vials and no..2iu = 2 units not 20 units. (iu=international units).

I feel like, for at least harm reduction, we should verify a few things before you jam that baby into your abdomen.

1) is this a kit of generics and let's work to identify how many units each vial is meant to have.

2) how many iu (units) are you attempting to run a day? And what's your protocol.

3) I see you're using a 3ml syringe to reconstitute, but what are you intending to use to pin, it sounds like the 3ml syringe again. Do you have insulin needles? They can be bought over the counter no pressure no prescription at any pharmacy if you're stateside.
1. Yes this is a kit of genetics, there are 10 vials in the kit, 24 iu each

2. Plan is to run 2 IU of growth a day, pinned pre bed

3. I was using the 3 ml syringe just for reconstitution, I do have insulin syringes that I intend to use for the actual pinning
 

Priestbrah1

New member
Opti stated HGH is not as fragile as it’s made out to be. So I think you should be fine.

Your calculations are correct for a 2 IU pin.

I did the reconstitution for mine using a slin pin and angled it. I had the same issue you had but the BAC water hit the side of the vial and went down and I was able to control it a bit more.

Hope this helps.

-Priest
 

Hypertrophy

Well-known member
Verified Source
1. Yes this is a kit of genetics, there are 10 vials in the kit, 24 iu each

2. Plan is to run 2 IU of growth a day, pinned pre bed

3. I was using the 3 ml syringe just for reconstitution, I do have insulin syringes that I intend to use for the actual pinning
Yes, your calculations are correct for 2ius (y)
 
Top