Finalizing first cycle, looking for feedback!

[WalnutBlast]

Just posting this finalizing everything to make sure I’m not missing anything for my first cycle. Plan is to blast for 3 months. Test E 500mg EW weeks 1-9, then weeks 9-12 Test Prop 500mg EW. Will have AI on hand. I am keeping this blast hidden from my doctor who will be getting bloodwork from me 4 weeks after the cycle. To make sure all my bloods come back normal my plan is to return to my standard TRT doses for the 4 weeks following my blast before the labs. The bloodwork will consist of a CMP, CBC, T3, T4, and Testosterone levels as well as liver. Everything sound like it should work out well?

 

[Colonial Labs]

Why the switch to prop at the end?

 

[WalnutBlast]

Colonial Labs" pid='80094' dateline='1579983080:

Why the switch to prop at the end?

Just to make sure my bloods come back normal!

 

[Colonial Labs]

WalnutBlast" pid='80097' dateline='1579984593:

Colonial Labs" pid='80094' dateline='1579983080:

Why the switch to prop at the end?

Just to make sure my bloods come back normal!

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

 

[WalnutBlast]

Colonial Labs" pid='80098' dateline='1579984955:

WalnutBlast" pid='80097' dateline='1579984593:

Colonial Labs" pid='80094' dateline='1579983080:

Why the switch to prop at the end?

Just to make sure my bloods come back normal!

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

Won’t it get out of my system faster though?

 

[Colonial Labs]

WalnutBlast" pid='80100' dateline='1579985058:

Colonial Labs" pid='80098' dateline='1579984955:

WalnutBlast" pid='80097' dateline='1579984593:

Colonial Labs" pid='80094' dateline='1579983080:

Why the switch to prop at the end?

Just to make sure my bloods come back normal!

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

Won’t it get out of my system faster though?

Yea, but there’ll be a period of a few days or a week where the enanthate is slowly leaving and the prop has already built up to peak levels. During these few days your peak will be higher than it was when you were on enanthate. After these days, it should normalize though.

 

[WalnutBlast]

Colonial Labs" pid='80102' dateline='1579985292:

WalnutBlast" pid='80100' dateline='1579985058:

Colonial Labs" pid='80098' dateline='1579984955:

WalnutBlast" pid='80097' dateline='1579984593:

Colonial Labs" pid='80094' dateline='1579983080:

Why the switch to prop at the end?

Just to make sure my bloods come back normal!

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

Won’t it get out of my system faster though?

Yea, but there’ll be a period of a few days or a week where the enanthate is slowly leaving and the prop has already built up to peak levels. During these few days your peak will be higher than it was when you were on enanthate. After these days, it should normalize though.

Makes sense. You think I would be fine just doing Test E all the way through?

 

[Colonial Labs]

WalnutBlast" pid='80104' dateline='1579985581:

Colonial Labs" pid='80102' dateline='1579985292:

WalnutBlast" pid='80100' dateline='1579985058:

Colonial Labs" pid='80098' dateline='1579984955:

WalnutBlast" pid='80097' dateline='1579984593:

Just to make sure my bloods come back normal!

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

Won’t it get out of my system faster though?

Yea, but there’ll be a period of a few days or a week where the enanthate is slowly leaving and the prop has already built up to peak levels. During these few days your peak will be higher than it was when you were on enanthate. After these days, it should normalize though.

Makes sense. You think I would be fine just doing Test E all the way through?

Yep, that’s what I’d do! 4 weeks of cruising is plenty to have you back to normal levels.

 

[WalnutBlast]

Colonial Labs" pid='80106' dateline='1579986431:

WalnutBlast" pid='80104' dateline='1579985581:

Colonial Labs" pid='80102' dateline='1579985292:

WalnutBlast" pid='80100' dateline='1579985058:

Colonial Labs" pid='80098' dateline='1579984955:

They should definitely be normal after 4 weeks even with enanthate, but either ways it doesn’t matter. Expect an additional spike in test levels when you switch over to the prop because the enanthate will be at peak levels and then the prop will increase the peak further due to its fast kick in time. Just a heads up.

Won’t it get out of my system faster though?

Yea, but there’ll be a period of a few days or a week where the enanthate is slowly leaving and the prop has already built up to peak levels. During these few days your peak will be higher than it was when you were on enanthate. After these days, it should normalize though.

Makes sense. You think I would be fine just doing Test E all the way through?

Yep, that’s what I’d do! 4 weeks of cruising is plenty to have you back to normal levels.

Ik my testosterone would be normal, but what about things like RBC, my CMP, etc…?

 

[Colonial Labs]

WalnutBlast" pid='80107' dateline='1579986493:

Colonial Labs" pid='80106' dateline='1579986431:

WalnutBlast" pid='80104' dateline='1579985581:

Colonial Labs" pid='80102' dateline='1579985292:

WalnutBlast" pid='80100' dateline='1579985058:

Won’t it get out of my system faster though?

Yea, but there’ll be a period of a few days or a week where the enanthate is slowly leaving and the prop has already built up to peak levels. During these few days your peak will be higher than it was when you were on enanthate. After these days, it should normalize though.

Makes sense. You think I would be fine just doing Test E all the way through?

Yep, that’s what I’d do! 4 weeks of cruising is plenty to have you back to normal levels.

Ik my testosterone would be normal, but what about things like RBC, my CMP, etc…?

Everything should be fine after that amount of time. Even during the blast if you live a healthy lifestyle, those things would be normal on just a 500mg test blast.

 

[2scoopzftw]

Curious to know which source you wound up going with.

 

[WalnutBlast]

MPS721" pid='80129' dateline='1579999620:

Curious to know which source you wound up going with.

I have been communicating with a private source and will likely go with him

 

[2scoopzftw]

WalnutBlast" pid='80134' dateline='1580001459:

MPS721" pid='80129' dateline='1579999620:

Curious to know which source you wound up going with.

I have been communicating with a private source and will likely go with him

Damn, I thought private sources only accept existing customers, no?

 

[WalnutBlast]

MPS721" pid='80135' dateline='1580001674:

WalnutBlast" pid='80134' dateline='1580001459:

MPS721" pid='80129' dateline='1579999620:

Curious to know which source you wound up going with.

I have been communicating with a private source and will likely go with him

Damn, I thought private sources only accept existing customers, no?

Yeah I met him on reddit. He offered to let me be a first time customer.

 

[2scoopzftw]

WalnutBlast" pid='80138' dateline='1580001971:

MPS721" pid='80135' dateline='1580001674:

WalnutBlast" pid='80134' dateline='1580001459:

MPS721" pid='80129' dateline='1579999620:

Curious to know which source you wound up going with.

I have been communicating with a private source and will likely go with him

Damn, I thought private sources only accept existing customers, no?

Yeah I met him on reddit. He offered to let me be a first time customer.

Gotcha, well good luck bro!