Because I’d prefer injecting 1mL vs 2mL+. There are blends for Test-P/Tren-A but none for E.Why do you want a blend?
Its easy to do it yourself with seperate vials and have more freedom with the doses of each compound and less solvents used… And you’re more likely to get what you pay for in mg/ml with seperate vials
That’s basically what it comes down to is pinning convenience. Which is why, I’d assume, most people purchase blends. One and done.It is surprisingly easy to brew yourself, since both are long esters, and easy compounds. Just go for it - no need for a fancy setup, syringe filters, syringe, needles, a couple of sterile vials, some alcohol swabs, and your good to go. There is a easy guide on /r/steroids for brewing with the minimalist setup in mind. https://www.reddit.com/r/steroids/wiki/homebrew/list - for making your own blends, read this guide: https://www.ugbodybuilding.com/threads/85-AAS-Conversions-Blends. If interested, I can post some more links with useful information on brewing. Also check out this calculator for a good starting point: https://www.steroidcal.com/oil_1 - all in all, buying raws, the basic equipment, is a hell of a lot cheaper than finished gear.
I understand the preference for blends (if they have the right dosage for you), all in all it is less oil to inject, always a nice thing. Especially if you need to keep daily injections below 1 ml., or E3.5D ones below 3.5 ml.
Gainsbruh" pid='10883' dateline='1525204274:
Because I’d prefer injecting 1mL vs 2mL+. There are blends for Test-P/Tren-A but none for E.Why do you want a blend?
Its easy to do it yourself with seperate vials and have more freedom with the doses of each compound and less solvents used… And you’re more likely to get what you pay for in mg/ml with seperate vials
I think most sources here accurately dose their vials so I’m not concerned about getting less than I paid for. There are numerous sources that offer Tren-E in a blend but none of those blends are Test-E.
juicyfatpowerlifter" pid='10888' dateline='1525204846:
That’s basically what it comes down to is pinning convenience. Which is why, I’d assume, most people purchase blends. One and done.It is surprisingly easy to brew yourself, since both are long esters, and easy compounds. Just go for it - no need for a fancy setup, syringe filters, syringe, needles, a couple of sterile vials, some alcohol swabs, and your good to go. There is a easy guide on /r/steroids for brewing with the minimalist setup in mind. https://www.reddit.com/r/steroids/wiki/homebrew/list - for making your own blends, read this guide: https://www.ugbodybuilding.com/threads/85-AAS-Conversions-Blends. If interested, I can post some more links with useful information on brewing. Also check out this calculator for a good starting point: https://www.steroidcal.com/oil_1 - all in all, buying raws, the basic equipment, is a hell of a lot cheaper than finished gear.
I understand the preference for blends (if they have the right dosage for you), all in all it is less oil to inject, always a nice thing. Especially if you need to keep daily injections below 1 ml., or E3.5D ones below 3.5 ml.
I was considering home brewing but I have my kids 7 days a week and don’t have a spot to brew where they wouldn’t see. Right now purchasing from a source is my best option.